Решение проблем с NBTEVO, Коды FSC для BMW -----> Получить - жмите ссылку |
BMW X1 xdrive E84
#1
Отправлено 23 декабря 2015 - 14:30
In particular I'm looking for these points:
-What types of cable I have to use? Inpa k+kan USB?
-I can use your software for upgrade my Europe Motion map (2012)
Thanks You in advance
#2
Отправлено 23 декабря 2015 - 16:10
You'll need ICOM A+B, OPS or OPPS to update your CIC software. Don't do this over K+DCAN Cable.
The software you need to update CIC is called WinKFP, which is part of BMW Standard Tools.
The map is updated using USB stick. Since few on this forum speak English and all instructions posted here are in Russian, you may have better luck finding instructions on English-speaking forums.
#3
Отправлено 24 декабря 2015 - 02:32
But if i only want to "crack" the FSC code to update ONLY the map, what cable i have to user?
#4
Отправлено 24 декабря 2015 - 05:10
Thanks for your help!
But if i only want to "crack" the FSC code to update ONLY the map, what cable i have to user?
You need post your vin here.
- jacopo99 это нравится
#5
Отправлено 24 декабря 2015 - 20:12
VN16396
Thanks for Your help!
#6
Отправлено 27 декабря 2015 - 13:53
#7
Отправлено 27 декабря 2015 - 14:07
Non ti serve nessun cavo, ti serve solo la chiavetta usb e il programma per caricare la mappa "gi? pronta"
#8
Отправлено 27 декабря 2015 - 14:11
Ma dopo aver scaricato la mappa da un qualsiasi torrente, poi non devo inserire il codice FSC che qualcuno deve generare? Che programma intendi per caricare la mappa?
#9
Отправлено 27 декабря 2015 - 14:14
Se l'hai scaricata dal torrent, ci doveva essere assieme il programma che ti spiega come modificare i file per avere un codice giusto. Diversamente contatta qualsiasi dei utenti "pro" che dietro a un pagamento ti possono fare il tutto loro
#10
Отправлено 27 декабря 2015 - 14:24
#11
Отправлено 01 января 2016 - 23:19
#12
Отправлено 26 мая 2016 - 23:02
2. Use the patch cable patch cord cable to connect the adapter to your PC.
3. Configure your adapter on the PC to have the network settings that match the subnet configured on CIC network adapter.
1. On Windows open Control Panel\Network and Internet\Network Connections.
2. Right-click the icon of your network adapter and select Properties.
2.1 [optional] If you have Windows 8/Windows 8.1/Windows 10 with installed Hyper-V feature, right-click on the vEthernet Hyper-V Virtual Ethernet Adapter and not on the physical adapter. This is because when Hyper-V option is installed, virtual adapter plays the role of your network adapter; physical adapter plays the role of a network switch.
3. In the Properties dialog box find the Internet Protocol Version 4 (TCP/IPv4) item and click Properties.
4. On the General tab for the IPv4 properties set the address from the range of the IP addresses bound to the network interface on CIC.
10.250.89.2
160.48.199.99
169.254.199.99
1. On the General tab for the IPv4 properties choose Use the following IP address and type any IP from the CIC subnet, e.g.: 10.250.89.3
2. We don't need the whole 24-bits of subnet mask, because we just need to connect 1 PC to CIC, 10.250.89.0/24 is just okay. In the Subnet mask type 255.255.255.0.
3. Leave the Default gateway field blank. Windwos will automatically detect the default gateway (which is by default 10.250.89.1).
4. Don't change anything else in this dialog box and click OK.
5. Click OK in the Properties dialog to apply changes to the network interface on your PC.
6. [optional] Right-click on the configured adapter and select Disable, then select Enable from the same context menu of the adapter. This will help you make double sure that changes applied to your adapter.
7. Open command line and ping the network adapter on CIC by running:
ping -n 10 10.250.89.3
1. Download and install the portable version of WireShark. Don't forget about the PCAP interface, which is typically bundled with WireShark. PCAP is necessary to sniff network traffic.
2. Start WireShark and select your network apapter (or, for Hyper-V configuration, select virtual adapter).
3. When WireShark is started, observe IP addresses in the Source and Destination columns. Most likely the ones more frequenlty showing in the Source column pertain to the network set on CIC.
########## USB ETHERNET ADAPTORS
vendor=0x0bda,device=0x8150,type=ETH,driver=devn-rtl8150.so,args=speed=10 duplex=1,netif=5,netip=172.16.250.248,netmsk=255.255.0.0
vendor=0x08dd,device=0x0986,type=ETH,driver=devn-pegasus.so,args=speed=10 duplex=1,netif=5,netip=172.16.250.248,netmsk=255.255.0.0
vendor=0x0b95,device=0x1720,type=ETH,driver=devn-asix.so,args=speed=10 duplex=1,netif=5,netip=172.16.250.248,netmsk=255.255.0.0
vendor=0x0b95,device=0x7720,type=ETH,driver=devn-asix.so,args=speed=10 duplex=1,netif=5,netip=172.16.250.248,netmsk=255.255.0.0
vendor=0x0846,device=0x1040,type=ETH,driver=devn-asix.so,args=speed=10 duplex=1,netif=5,netip=172.16.250.248,netmsk=255.255.0.0
vendor=0x2001,device=0x3c05,type=ETH,driver=devn-asix.so,args=speed=10 duplex=1 phy_88772=0,netif=5,netip=172.16.250.248,netmsk=255.255.0.0
vendor=0x9710,device=0x7830,type=ETH,driver=devn-mcs7830.so,args=speed=10 duplex=1,netif=5,netip=172.16.250.248,netmsk=255.255.0.0
########## USB ETHERNET ADAPTORS
vendor=0x0bda,device=0x8150,type=ETH,driver=devn-rtl8150.so,args=speed=10 duplex=1,netif=5,netip=172.16.250.248,netmsk=255.255.0.0
vendor=0x08dd,device=0x0986,type=ETH,driver=devn-pegasus.so,args=speed=10 duplex=1,netif=5,netip=172.16.250.248,netmsk=255.255.0.0
vendor=0x0b95,device=0x1720,type=ETH,driver=devn-asix.so,args=speed=10 duplex=1,netif=5,netip=172.16.250.248,netmsk=255.255.0.0
vendor=0x0b95,device=0x7720,type=ETH,driver=devn-asix.so,args=speed=10 duplex=1,netif=5,netip=172.16.250.248,netmsk=255.255.0.0
vendor=0x0846,device=0x1040,type=ETH,driver=devn-asix.so,args=speed=10 duplex=1,netif=5,netip=172.16.250.248,netmsk=255.255.0.0
vendor=0x2001,device=0x3c05,type=ETH,driver=devn-asix.so,args=speed=10 duplex=1 phy_88772=0,netif=5,netip=172.16.250.248,netmsk=255.255.0.0
vendor=0x9710,device=0x7830,type=ETH,driver=devn-mcs7830.so,args=speed=10 duplex=1,netif=5,netip=172.16.250.248,netmsk=255.255.0.0
########## PFS Devices
########## USB SERIAL converters
vendor=0x067b,device=0x2303,type=SER,driver=devc-serusb_prolific,args=-b 57600 -F -S -v
#vendor=0x067b,device=0x2303,type=SER,driver=devc-serusb_prolific,args=-b 57600 -F -S -v -o disable=rx
########## Mass Storage device
vendor=0xffff,device=0xffff,type=MSD,driver=devb-umass,cam=verbose retries=3:0:0:0,blk=normv noexec noatime cache=512k auto=none commit=high delwri=0 devdir=/dev/umass,dos=sfn=windows codepage=cp850 vollabel=ignore hidden=dot
#vendor=0xffff,device=0xffff,type=MSD,driver=devb-umass,cam=verbose timeout=4:0:0:0 retries=3:0:0:0,blk=verbose=5 ra=0 normv noexec cache=128k auto=none commit=high delwri=0 devdir=/dev/umass
Here are the sample devices that match the drivers integrated into CIC:
#RTL8150 Chipset
vendor: 2001 ("D-Link Corp."), product: 3c05 ("DUB-E100 Fast Ethernet Adapter(rev.B1) [ASIX AX88772]")
Количество пользователей, читающих эту тему: 1
0 пользователей, 1 гостей, 0 анонимных