- New I-levels for the E90 and E70 contain new DDE software to correct the zero-mass adaptation faults from occurring after intake carbon cleaning as described in SI B13 04 14.
Target I-levels=> E89X-14-11-501 and E070-14-11-501
Note: This requires the service function for the DDE incremental wheel adaptation reset to be performed after programming – this test plan is included in ISTA 3.47.10.
- New I-level for all F Series diesels for the SCR fault 805220, which occurs in cold temperatures as described in SI B16 16 14.
- F3x vehicles: N55 Power Kit can now be retrofitted again.
-The Service Function for the E90 and E70 M57Y diesels to reset the incremental wheel adaptation after carbon cleaning is included.
The vehicles must first be updated using ISTA/P 3.54.3 (Target I-levels=> E89X-14-11-501 and E070-14-11-501) for this test plan to complete successfully, as all previous software versions do not support this function.
With these ISTA/P and ISTA version releases, IRAP sessions are no longer necessary for both issues.
- All vehicles with N63: New test plan for checking the timing chain wear. Important to note: this test plan is needed for the N63 Customer Care Package, which will be released starting January 1, 2015.
Because of these important updates, all workshop equipment must be updated by January 1, 2015 in order for Customer Care Package work to be performed at your center.